HOW TO DO A 1000 COIN MERKEL BLOCK IF YOU WANT TO TEST THE NETWORK

Litecoin / Bitcoin Core Wallet 15.1 ( MOST punctuation is in apple type )

You should of turned on coin control features and spend unconfirmed change (restart wallet if first time)

On the send page you should see an index tab on the top left if coin control features is on.

How to true the utilities console : ( you must do this for every mining transaction )

If you made a password for the wallet you must type:

walletpassphrase “password” 3600 ( 3600 seconds wallet is unlocked )

getnewaddress (then press enter or return key)

= receiving address

dumpprivkey + receiving address (then press enter or return key) 

= privatekey for the receiving address.

validateaddress + receiving address (then press enter or return key)

= pubkey for the createmultisig

createmultisig 1 ‘[“pubkey”]’ (then press enter or return key)

= multisigaddress + redeem script 

signmessagewithprivkey “privatekey” “privatekey” (then press enter or return key)

= signature

validateaddress “multisigaddress” (then press enter or return key)

= scriptpubkey A914

verifymessage “receiving address” “signature” “privatekey” (then press enter or return key)

true

Now you’ve created a multisig address and a payout receiving address

litecoin:receiveaddress

litecoin:multisigaddress

=====================================================================

=====================================================================

You should of turned on coin control features and spend unconfirmed change (restart wallet)

On the send page you should see an index tab on the top left if coin control features is on.

Send to the wallet 1.7 litecoins

When the coin gets into the wallet put 1.4 coins into a receiving address

There should be 2 addresses in the index.

1.4 and 0.3 = 1.7 estimated because it removes a small fee when you send coin

Click the index and Check box the 0.3 and select ok at the bottom to use that address and coin

=====================================================================

=====================================================================

Open the URI and paste and click in your multisig address with the coinname in front of it

litecoin:multisigaddress

It should go right to the send page for payment !

At the bottom is the transaction fee per signature. We’re doing 1 required signature to unlock the funds. The top is where you put the total for the transaction plus the relay fee of 0.001 per signature.

So if we put 0.001 on bottom you put 0.002 on top. Then click the send button to check the “added as a transaction fee” it must be 0.00565000 to be on the right network. So I tried a transaction and it was something like 0.0458528 bottom and on the top 0.0468528 with 0.001 more on the top for the relay fee for 1 signature. You keep adjusting the bottom to check the added as a transaction fee

And then when you finally get it right make sure you multiply the top to the right number and send it all in as the payment.

Check the information page. Then click on your transaction. DO NOT CLICK THE LITTLE UP AND DOWN ARROWS IT WILL SCREW UP THE WALLET. YOU WILL HAVE TO RESTART THE WALLET IF YOU CLICK THE ARROW.

Look at the information for the payment you just made. You should see at the bottom the output index number. 0 means you didn’t hit the network with that payment and 1 means you hit the network and dont need to do it again because you only need 1 for your multisig. So you need to repeat the payment again the same way till you get an output index 1

Normally you would be running a miner with your multisig address as the username

=====================================================================

=====================================================================

Now wait for at least 1 confirmation

And click in your multisig address to the send page as the change address and agree to the wallet you just made this address.

Goto the index and check mark the 1.4 coin address and click ok at the bottom.

Open the uri and click in your receiving address with coin name in front of it

Then open the uri and click in the multisig address with coin name in front if it

Both addresses are now able to be paid with the network address on the bottom in the index 1 position and the receiving address above it in the index 0 position.

Pay them both the fee at the bottom plus 0.001 each and put 1 coin with the network

So it looks something like this :

0.02589455 receive address

1.02589455 network address

And at the bottom 

0.02489455

till you get the same network added as a transaction fee 0.00565000

A better network is 0.00565421 or something like that.

So you make sure that your change address is your network multisig address and your paying with 1.4 coin wallet and the payment is all correct to both addresses top being receiving address and bottom being the network address. You make sure the money is confirmed and you click in the raw transaction network payment. 

It will show 2 transactions with one being the 1.044 raw transaction id and the 0.3 txid for the signature with its vout output index number.

=====================================================================

=====================================================================

Wait till the coin is confirmed into the address and create the raw transaction

createrawtransaction ‘[{“txid”:””,”vout”:n}]’ ‘{“receive_address”:0.000,”changeAddress”:0.000}’

Put the txid for the 1 coin with the vout must be 1. 

Put receiving address with 1000.000 as the number

Put the multisig address and then subtract 0.001 from the 1.0407524 so it turns to 1.0397524

Or something like that. 

When looking at the transaction information its that top number on the information page for the 1 coin txid.

Click it all in and you get a hex for the beginning of the signature.

=====================================================================

=====================================================================

Now click in your signature with the information being to the right of the script and key except for the private key being right on top of the private key but put the information in between the double quotes “” to the right. The vout “n” changes to the output index number. 

hex from create at the beginning of the signature

signrawtransaction “hex” ‘[{“txid”:””,”vout”:n,”scriptPubKey”:””,”redeemScript”:””}]’ ‘[“PrivateKey”]’

Click it in and you get a completed signed hex

=====================================================================

=====================================================================

Goto the index and click the receiving address and its change 

then type sendrawtransaction and put the signed hex like this :

sendrawtransation “signedhex”

= if you get a txid if the network is on. But the coin isn’t in the wallet yet . Its in the network address.

Your lucky if you got a txid for 1000 coins and you need to send me some

The network is supposed to be on 8am to 4pm mon thru fri

=====================================================================

=====================================================================

Now it time to pull the unused coin out of the network address address.

For this we will be using :

createrawtransaction ‘[{“txid”:””,”vout”:n}]’ ‘{“receiving_address”:0.000}’

Put the txid for the money with your receiving address not the network address and

Subtract 0.001 from the number in the address.

So 1000 coins would be 999.999

Sign it out and it goes to the wallet.

Send it to Coinbase and transfer it to bitcoin and send me 1 or 2 to my address :

1ctYNDMqwgG7f8DYZidUDPt48CcUNv2j8

=====================================================================

Apple typing =

createmultisig 1 ‘[“”]’

createrawtransaction ‘[{“txid”:””,”vout”:n}]’ ‘{“receiving_address”:0.000}’

createrawtransaction ‘[{“txid”:””,”vout”:n}]’ ‘{“receive_address”:0.000,”changeAddress”:0.000}’

signrawtransaction “hex” ‘[{“txid”:””,”vout”:n,”scriptPubKey”:””,”redeemScript”:””}]’ ‘[“PrivateKey”]’

sendrawtransaction “completesignedhex”

=====================================================================

=====================================================================

Windows typing =

createmultisig 1 '[""]' ( the number 1 was typed in apple type. You must retype 1 if using windows

createrawtransaction '[{"txid":"","vout":n}]' '{"receive_address":0.000}'

createrawtransaction '[{"txid":"","vout":n}]' '{"receive_address":0.000,"changeAddress":0.000}'

signrawtransaction "hex" '[{"txid":"","vout":n,"scriptPubKey":"","redeemScript":""}]' '["privatekey1"]'

sendrawtransaction "signed hex"

blockchainconsole.xyz

chainz.cryptoid.info/ltc/

chainz.cryptoid.info/btc/

Donations accepted 

1ctYNDMqwgG7f8DYZidUDPt48CcUNv2j8

Brian Prochoren

brianprochoren@gmail.com

bitcoin added as a transaction fee works with 0.0015 also instead of 0.00565 added as a transaction fee

please send me some bitcoin for teaching this to you my network isn’t working so I decided to teach this so I can earn some money

My BTC ADDRRESS IS A PAPER WALLET UNLIMITED